Restoration Story: 2013 Toyota Sienna Front Accident Repair Calgary, Alberta

This 2013 Toyota Sienna arrived at the shop with extensive damage to the front driver-side quadrant following a heavy impact. Given its role as a high-utilization family vehicle, the focus was on ensuring a repair that restored both structural safety and cosmetic appeal. Phase 1: Damage Analysis and Teardown The impact was concentrated on the front left corner, resulting in a shattered bumper cover, a crushed headlight assembly, and significant displacement of the front grille. Upon removing the damaged exterior panels, technicians performed a "pull" analysis to check the radiator support and front impact bar. It was determined that while the primary frame remained straight, the upper tie bar for the radiator required minor realignment to ensure the new hood and fender would latch securely. Phase 2: Component Sourcing and Installation The repair required several key OEM-spec components: a new front bumper fascia, a left-side projector headlight unit, and a multi-piece grille assembly. During this phase, technicians also addressed damaged internal clips and brackets that secure the wheel well liner. The new headlight was bench-tested for alignment and electrical connectivity before being permanently mounted. Phase 3: Refinishing and Final Detailing To achieve a factory-accurate finish, the new bumper was prepped with an adhesion promoter and sprayed to match the Sienna’s deep metallic paint. A high-quality clear coat was applied to provide a durable, UV-resistant finish. After a final curing process, the vehicle underwent a fit-and-finish inspection, ensuring that all body gaps were uniform and that the front-end sensors were correctly calibrated. The result is a complete restoration that erases the evidence of the collision, returning this Sienna to the road in peak condition for many more miles of family travel.